大家的問題是否因為upgrade之後沒有把系統做factory reset 呢?? 正如 Linksys Router 在每次upgrade DD-WRT 之後也要做factory reset 一樣，才能把之前的東西完全剷走。這是廠方的建議啊。
Build: 2010-6-9
* Add script to detect if asterisk is alive. And start asterisk if it dies, script are only take effect after reset to factory default. If you want stop the asterisk for debug purpose. Please kill the IsAsteriskAlive process otherwise the Asterisk will start within 1 minutes after you stop it.
* Fix the Ip01 fxo silent issue which introduce in last update.
另外，它們有兩個firmware 版本，正常應該是用 MD5 這一個的，原因如下:
There are two kinds of firmware:
Ext2 file:
the file is requested when upgrade from BAPS base firmware to Astfin2 base firmware. If your IPxx use the BAPS base firmware (old release model) and want to upgrade the Astfin2 base firmware, you use the ext2 file and upgrade via the RS232 port.
md5 file:
if you already use the Astfin2 firmware, you can upgrade the firmware via the GUI. More info about how to upgrade please refer the user manual. How to check if the device is BAPS base or ASTFIN2 base? the BAPS base firmware support ipkg command in the OS and Astfin2 firmware doesn’t support. You can use SSH to access to the firmware and run “ipkg update” to check if the ipkg is supported.
The default firmware shipped by ATCOM is Astfin2 structure firmware. |
發表於 2010-7-20 10:57
| 
