bubblestar

回復 9# ttmuskie


   
Replied.  Please check PM.

bubblestar

回復 11# ttmuskie


   
I use your same dialplan and give it a try.  There is no problem as you mentioned.  The message from CLI is as below:

== Using SIP RTP CoS mark 5
    -- Executing [852350XXXXX@from-cmphone:1] Playback("SIP/cmphone-00000008", "demo-echotest") in new stack
    -- <SIP/cmphone-00000008> Playing 'demo-echotest.ulaw' (language 'en')    -- Executing [852350XXXXX@from-cmphone:2] Hangup("SIP/cmphone-00000008", "") in new stack
  == Spawn extension (from-cmphone, 852350XXXXX, 2) exited non-zero on 'SIP/cmphone-00000008'


I can hear the playback before it hangs up.

The only message difference that I got is marked in RED above.  Hence, I think you may put the codec allow = ulaw in the first place of general section in sip.conf and try again.

bubblestar

Despite of the echo test problem, can you get the normal dial in call properly?

bubblestar

Or you might need to forward the default UDP port 5060 to 9060 in your router.