bubblestar

My Atom D525 is with dual core CPU but I cannot puzzle out the right choice of using *-atom.so or *-core2.so

If both are viable, could anyone tell which is better in performance for this PC or CPU ?

bubblestar

Thanks for the enlightenment.  The shorter translation time and less CPU resource usage the better.

bubblestar

D525MW雖然是 ATCOM 機種，如果是 4G RAM 行 64bit 的話，我發覺不對應ATOM codec，要選擇

codec_g729-ast14-gcc4-glibc-x86_64-core2.so
codec_g723-ast14-gcc4-glibc-x86_64-core2.so

但要找speedx 及 ilbc，可能要自己compile.

bubblestar

係呀，試咗幾個版本，Asterisk 1.8 仍然遇到不少問題。Asterisk 1.6 沒有用開，而Asterisk 1.4 最穩定，而且又有做Backup，只是未試過 64 bit 版本，都唔錯，暫時用住Asterisk 1.4 without GUI。想到辦法才再裝 Asterisk 1.8，因為係咁 install / uninstall 好傷SSD 嘛!

Asterisk 1.8 好奇怪，已跟足指示步驟安裝，WinSCP 也檢查過 res_jabber and chan_gtalk 全部係到。沒有error，但到咗boot 機之後，會出現如下。

下載 (72.41 KB)

2010-12-30 17:02

bubblestar

I just install from scratch by compiling 1.8.1.1 directly instead of 1.8

Could you advise which version of library should be used.  Thanks.

bubblestar

Actually, I installed 32 bits at the very beginning, but with same result. So that why I tried 64 bits to see what it would be.

bubblestar

回復 18# ckleea


   

Ha Ha !  I follow this link.

http://www.telecom-cafe.com/foru ... d=3184&pid=9647

bubblestar

回復 19# ckleea


   
Yes, I did.  But I don't think they are all installed in proper path.  Anyway, I WILL try 32 bits again until it succeeds.

bubblestar

回復 20# ckleea


   
Following ckleea's recommended link and their method, I re-compiled Asterisk 1.8.1.1 again.  This time, the errors mesage of chan_gtalk and res_jabber are resolved as they disppear from the /var/log/asterisk/messages.    What a useful guideline!  Thanks.

However, there are still errors loading modules for the res_calendar_icalendar.so and related files.  I remember that ckleea C-Hing had said he had some problem on icalendar when compiled his Asterisk 1.8 some months earlier.  Is that the same problem as you?  Could you advise how it was resolved?  Thanks.

下載 (29.77 KB)

2011-1-1 17:20