Board logo

標題: pygooglevoice (gvoice) login 唔到 [打印本頁]
作者: edmond25    時間: 2016-7-29 11:34     標題: pygooglevoice (gvoice) login 唔到

只要改改 settings.py

Change the "LOGIN" to following value:
LOGIN = 'https://accounts.google.com/ServiceLoginAuth?service=grandcentral'

就OK
作者: ttmuskie    時間: 2016-7-29 15:36

We could use the the Google Voice under Asterisk by using its native connection again:

http://www.mikeslab.net/?p=330
作者: 角色    時間: 2016-7-29 15:38

是吗？那么好！很久都没有用GV了，但是之前好几个GV账号都被收回去了。
作者: lookforyou    時間: 2016-7-30 09:01

在piaf上用gv呼叫美加已经四年多了，非常棒
作者: 角色    時間: 2016-7-30 19:13

我的GV放在OBi110上面已经不知道多少年了！非常好用！
作者: SuiYan    時間: 2016-7-31 00:18

我無睇asterisk log.
頭先睇. 都發現xmpp login唔到GV
未有解決前. DISABLE左佢先
作者: ttmuskie    時間: 2016-7-31 06:46

我無睇asterisk log.
頭先睇. 都發現xmpp login唔到GV
未有解決前. DISABLE左佢先
SuiYan 發表於 2016-7-31 00:18



Did you do these?
  1. Google Voice:
  2. Create a fix for Ubuntu to make libgnutls work:

  4. vi /usr/bin/libgnutls-config
  5. Insert the following into the file:

  7. #!/bin/bash
  8. if [ "$1" == "--version" ]; then
  9. pkg-config --modversion gnutls
  10. else
  11. pkg-config $1 gnutls
  12. fi

  14. Save and exit, then make the file executable:

  16. chmod +x /usr/bin/libgnutls-config

  18. Get, extract, build, and install iksemel:

  20. cd /usr/src
  21. wget https://iksemel.googlecode.com/files/iksemel-1.4.tar.gz
  22. tar xvf iksemel-1.4.tar.gz
  23. cd iksemel-*
  24. ./configure
  25. make && make install
複製代碼
作者: edmond25    時間: 2016-8-1 15:15

本帖最後由 edmond25 於 2016-8-1 15:24 編輯

https://github.com/pettazz/pygooglevoice

using this, download and extract it. Edit the setting.py in package and install. For further info for installation, google pygooglevoice
https://hobbiesbytwinclouds.word ... voice-without-xmpp/

Google stopped XMPP long long ago
作者: ttmuskie    時間: 2016-8-1 20:08

回復 8# edmond25


Ching,

I was using xmpp under asterisk before Jul 2014. Then switched to pygooglevoice after July 2014.

Early this year, I switched from pygooglevoice to and set up the GV inside the OBI 110.

Just about a month ago, I setup the xmpp under the asterisk again (fresh install) when I saw this article http://www.mikeslab.net/?p=330。 And it's working with no problem.
  1. asterisk13*CLI> xmpp show connections
  2. Jabber Users and their status:
  3.        [gv] xxxx@gmail.com     - Connected
  4. ----
  5.    Number of clients: 1
複製代碼
作者: edmond25    時間: 2016-8-2 15:54

重裝XMPP 又真係打到喎，明明2014 後用唔到架，而家又得返咁搞野
作者: edmond25    時間: 2016-8-2 16:01

回復 9# ttmuskie


    用 OBi110 可以經 Asterisk 打 GV 嗎？有無config 教教？我用開 Grandstream FXO 所以可以唔用 OBi110 用 OB1200/202 可以嗎？
作者: ttmuskie    時間: 2016-8-3 11:53

本帖最後由 ttmuskie 於 2016-8-3 12:36 編輯
回復  ttmuskie


    用 OBi110 可以經 Asterisk 打 GV 嗎？有無config 教教？我用開 Grandstream FXO 所 ...
edmond25 發表於 2016-8-2 16:01



I just added  "{(1XXXXXXXXXX):sp2}" under "Physical Interfaces > PHONE > OutboundCallRoute" as my SP2 is registered to my Asterisk.

I don't have the OBI2xx. But I believe the principle will be the same.
作者: SuiYan    時間: 2016-8-16 09:39

回復 8# edmond25


   唔係喎, 我一路用緊xmpp
作者: 角色    時間: 2016-8-17 16:34

回復 11# edmond25

是可以的，我都是这样用。



歡迎光臨 電訊茶室 (http://telecom-cafe.com/forum/) Powered by Discuz! 7.2