Board logo

標題: 【RouterOS】—— MikroTik Cloud,有了自己图一无二的hostname [打印本頁]

作者: 角色    時間: 2014-8-21 10:04     標題: 【RouterOS】—— MikroTik Cloud,有了自己图一无二的hostname

本帖最後由 角色 於 2014-8-25 02:42 編輯

MikroTik有自己的DNS,自己不用去自己建立,V6.14开始才有。

http://wiki.mikrotik.com/wiki/Manual:IP/Cloud

http://www.phy2vir.com/mikrotik- ... me-and-ntp-service/
作者: 角色    時間: 2014-8-22 22:39

原来这个MiktroTik Cloud首先就有一个头一无二的hostname,用/ip cloud print就可以。

通过这个hostname,那么就知道它的WAN port的IP address,那么很多功能就从这个port开始,例如Winbox,VPN等等功能。
作者: 角色    時間: 2014-9-1 22:52

因为出了cloud router,那么在Quick Set=Home AP,在下面的VPN,如果enabled,那么DDNS和network time都自动set,但是time-zone=00:00,如果要set香港,那么就要下面指令:

/system clock manual set time-zone=+08:00

[attach]3337[/attach]

[attach]3338[/attach]
作者: 角色    時間: 2014-9-2 01:13

上面的VPN打完勾后,VPN基本的系统都自动set好,唯一就是要enable哪一种VPN。下面例子是用PPTP Server,具体如下:

/interface pptp-server server set enabled=yes
作者: yiucsw    時間: 2014-12-29 15:09

有没有用过。在中国有没有被Block?
作者: 角色    時間: 2014-12-29 15:11

在香港我经常用,你在大陆可以试试看。
作者: yiucsw    時間: 2014-12-30 00:06

我将MikroTik 放在ADSLRouter 后面,是不是不能Detect Public Address? 我的Public address 不是 125。。。。
[admin@MikroTik] /ip cloud> print
         enabled: yes
     update-time: yes
  public-address: 125.94.52.24
        dns-name: XXXX.sn.mynetname.net
          status: updated
         warning: DDNS server received request from IP 125.94.52.24 but your local IP was 192.168.86.110; DDNS service might not work.
作者: 角色    時間: 2014-12-30 00:12

是的,你这样连接是不可以从外面接入来。
作者: yiucsw    時間: 2014-12-30 12:19

前面的ADSL modem+Router,要变成ADSL Modem? ADSL PPOE?
作者: 角色    時間: 2014-12-30 23:55

你前面的router可以用RB代替,我妈妈家里都是这样。RB自己有PPPoE Client。(但是我见过有一体机,Modem+router一起。)
作者: yiucsw    時間: 2014-12-31 21:38

将RB带到香港发现 RB的DDNS没有问题。放在Vigor Router 后也能resolve public address.
在File内发现Changeip.rsc。 我猜是Block is Checkip 的网站被Block,所以在中国不能用。
作者: 角色    時間: 2015-1-1 03:32

因为checkip是用xxx.dyndns.org被blocked,之前网友在别的帖子也有提及过。
作者: mrandrewchan    時間: 2015-1-31 00:43

本帖最後由 mrandrewchan 於 2015-1-31 00:56 編輯

回復 4# 角色

Ching.

After upgrade the version from 5.x to 6.25, the router os auto change the mode from Home AP to WISP AP. Would you please let me know the difference of.  ( Before I use HKBN, now change to USB modem connect to ROS connect Internet ).The VPN function same as work in WISP mode ? Thanks.
作者: 角色    時間: 2015-1-31 00:52

I have not tried it yet. Although the default mode is WISP AP, it may have the way to switch back to HOME AP in somehow.
作者: 角色    時間: 2015-1-31 01:02

Are you able to use VPN service after having upgrade your RB box?
作者: mrandrewchan    時間: 2015-1-31 10:24

回復 15# 角色


Yes, but can't connect via ROS provide domain name xxxx.sn.mynetname.net use on Winbox. May be I use the USB modem ( E180 ) access Internet.
作者: yiucsw    時間: 2015-1-31 16:10

Yes, if already enable 8291 winbox port on /ip/firewall/filter, it is the 3G provider who do not provide you the public IPV4 address. the easy way to check is checkrealip.com. compare with windows or router IP address. if they are the same, that mean you have a real IP.
Currently i am testing to use an 跳板to go to remote site (which has no public IP).
1st step is login an RB which has an SSTP server connection back to SSTP client.  winbox/webbox can access remote RB and manage it. which is ok.
2nd step is use L2TP to acces SSTP server then route back to remote RB.  which is not test yet. If anyone has test it, pls let me know the setup and hurdle.
作者: mrandrewchan    時間: 2015-2-24 00:52

回復 17# yiucsw


Dear Ching,

After check the router IP address is 10.x.x.x not public IP. So, how to fix it use the routeros domain. Thanks.
作者: 角色    時間: 2015-2-24 23:53

It meant you have to use your mainland router as a VPN client to log on the remote VPN server which has the public address.




歡迎光臨 電訊茶室 (http://telecom-cafe.com/forum/) Powered by Discuz! 7.2