標題: 【RouterOS】—— PPTP client and routing local packets to the remote server gateway [打印本頁] 作者: 角色 時間: 2014-8-14 21:34 標題: 【RouterOS】—— PPTP client and routing local packets to the remote server gateway
本帖最後由 角色 於 2014-8-17 15:22 編輯
Objectives:
1) Using RouterOS GUi (or Nat code) to program the device such that the local device can use the remote gateway.
The following wiki describes the step to mark which destination IP address has to go out via vpn tunnel (route packets to the remote VPN gateway) and the rest of destination IP addresses will use the local gateway. http://wiki.mikrotik.com/wiki/Policy_Base_Routing作者: 角色 時間: 2014-8-15 00:32
thank alot. it is.a good solution. In china, i use Windows tracert. the packet route to HK. but nothing show up in Browser'www.Google.com'. any other method?作者: 雯雯 時間: 2015-1-3 19:44
Tracing route to 223.73.53.145 over a maximum of 30 hops
1 3 ms 14 ms 6 ms 192.168.85.1
2 92 ms 4 ms 3 ms 183178116001.ctinets.com [183.178.116.1]
3 13 ms 37 ms 17 ms 061092090129.ctinets.com [61.92.90.129]
4 14 ms 6 ms 17 ms 014199254241.ctinets.com [14.199.254.241]
5 64 ms 4 ms 12 ms 014136129118.ctinets.com [14.136.129.118]
6 323 ms 10 ms 7 ms chinamobileintl1-lacp-10G.hkix.net [202.40.160.2
15]
7 8 ms 6 ms 14 ms 211.136.1.114
8 14 ms 9 ms 13 ms 223.118.2.205
9 13 ms 21 ms 14 ms 223.118.10.1
10 10 ms 163 ms 28 ms 221.176.24.229
11 179 ms 19 ms 54 ms 221.176.18.113
12 23 ms * 519 ms 221.176.19.70
13 13 ms 22 ms 17 ms 120.196.0.2
14 937 ms 1841 ms 3090 ms 120.196.2.166
15 * * * Request timed out.