標題: NWT NetTalk Asterisk SIP Settings [打印本頁]

---

作者: 角色    時間: 2013-11-5 23:41     標題: NWT NetTalk Asterisk SIP Settings

本帖最後由 角色 於 2013-11-7 00:03 編輯

It was found (shown below) that the switch of NWT is the same as ComNet Phone, therefore the settings for ComNet Phone is also applicable to NWT Internet/Broadband Phone.

sip.conf

1. register => 33445566:password@ngn2.nwtbb.com/33445566
   
2. 
   
3. [nwt-nettalk]
   
4. username=33445566
   
5. type=peer
   
6. secret=password
   
7. qualify=yes
   
8. port=5060
   
9. insecure = port,invite
   
10. host=ngn2.nwtbb.com
    
11. fromusername=33445566
    
12. fromuser=33445566
    
13. fromdomain=home1.com
    
14. dtmfmode = rfc2833
    
15. canreinvite = no
    
16. defaultexpirey=300
    
17. context = from-nwt-nettalk

複製代碼

extension.conf

1. [trunk-nwt-nettalk-122]
   
2. exten => _122.,1,Dial(SIP/${EXTEN:3}@nwt-nettalk,,)
   
3. exten => _122.,n,Hangup()
   
4. 
   
5. [internal]
   
6. include => trunk-nwt-nettalk-122
   
7. 
   
8. [from-nwt-nettalk]
   
9. exten => 33445566,1,Dial(SIP/2004)

複製代碼

asterisk.conf

1. [options]
   
2. internal_timing = yes

複製代碼

---

作者: 角色    時間: 2014-4-18 21:37

The following sip.conf file contains the configuration for NWT settings

sip.conf

1. [nwt-nettalk]
   
2. username=31234567
   
3. type=peer
   
4. secret=Password
   
5. qualify=yes
   
6. port=5060
   
7. insecure=port,invite
   
8. host=ngn2.nwtbb.com
   
9. fromusername=31234567
   
10. fromuser=31234567
    
11. fromdomain=ngn2.nwtbb.com
    
12. dtmfmode=rfc2833
    
13. defaultexpirey=300
    
14. canreinvite=no
    
15. nat=yes
    
16. disallow = all
    
17. allow = ulaw
    
18. allow = alaw
    
19. context=from-nwt-nettalk

複製代碼

---

歡迎光臨 電訊茶室 (http://telecom-cafe.com/forum/)

Powered by Discuz! 7.2