標題: 【RouterOS】——port forwarding for Asterisk server [打印本頁]

---

作者: 角色    時間: 2013-10-14 18:13     標題: 【RouterOS】——port forwarding for Asterisk server

In order to make the Asterisk box work, we need to carry out port forwarding task on RouterOS

SIP UDP port: 5060
RTP UDP port: 10000-20000

Reference：

http://telecom-cafe.com/forum/vi ... &extra=page%3D1

---

作者: 角色    時間: 2013-10-14 18:30

Based on Qnewbie's script shown in the above post, we have

1. /ip firewall nat add chain=dstnat protocol=udp dst-port=5060 action=dst-nat to-addresses=192.168.88.100 to-ports=5060
   
2. 
   
3. /ip firewall nat add chain=dstnat protocol=udp dst-port=10000-20000 action=dst-nat to-addresses=192.168.88.100 to-ports=10000-20000
   
4. 
   
5. /ip firewall nat add chain=dstnat protocol=tcp dst-port=8088 action=dst-nat to-addresses=192.168.88.100 to-ports=8088

複製代碼

Using the URL path to enter the Asterisk-GUI setup

1. http://<RouterBoard_ip_address:8088>

複製代碼

---

作者: 角色    時間: 2013-10-15 22:25

因为要remote admin我的IP Phone，我再 forward 9999 TCP port to 192.168.88.10

1. /ip firewall nat add chain=dstnat protocol=tcp dst-port=9999 action=dst-nat to-addresses=192.168.88.10 to-ports=9999

複製代碼

---

作者: 角色    時間: 2016-9-8 13:06

There are other examples of setting up port forwarding task as follows:

http://captain-slow.dk/2011/02/19/nat-port-in-mikrotik/

---

歡迎光臨 電訊茶室 (http://telecom-cafe.com/forum/)

Powered by Discuz! 7.2