Board logo

標題: CMPhone setting in Asterisk 11 [打印本頁]
作者: ckleea    時間: 2012-11-10 16:35     標題: CMPhone setting in Asterisk 11

Below is my setting in sip.conf for working in and out CMPhone
  1. [general]
  2. context = default
  3. srvlookup = yes
  4. nat = force_rport,comedia ; Asterisk 11
  5. nat = yes ; Asterisk 1.8 or Asterisk 10
  6. externrefresh = 10
  7. autodomain = yes
  8. allowexternalinvites = no
  9. allowexternaldomains = no
  10. allowguest = no
  11. alwaysauthreject = yes
  12. port = 5060
  13. bindaddr = 0.0.0.0
  14. disallow = all
  15. allow = ulaw
  16. allow = alaw
  17. allow = g729
  18. allow = gsm
  19. allow = slin
  20. insecure = port,invite
  21. dtmfmode = rfc2833
  22. rfc2833compensate = yes
  23. faxdetect = yes
  24. registerattempts = 10
  25. relaxdtmf = yes
  26. notifyringing = yes
  27. notifyhold = yes
  28. notifycid = yes
  29. pedantic = yes ; yes for cmphone
  30. promiscredir = no

  32. subscribecontext = default


  35. register => 852350XXYYZ:password@202.0.179.3/852350XXYYZ

  37. [cmphone]
  38. type=peer
  39. host=202.0.179.3
  40. port=5060
  41. fromdomain=huawei.com
  42. fromuser=852350XXYYZ
  43. realm=huawei
  44. secret=password
  45. username=852350XXYYZ
  46. insecure=port,invite
  47. context=from-cmphone
  48. authname=852350XXYYZ
  49. dtmfmode=auto
  50. canreinvite=no
  51. qualify=no
  52. disallow = all
  53. allow = ulaw
  54. allow = alaw
  55. allow = g729
  56. **must inclue the following line in Asterisk 11
  57. icesupport = no
複製代碼
Because of change in Asterisk 11, nat parameter needs to change. Besides, in Asterisk 11, icesupport is ON as default. It needs to switch off in the cmphone context. Otherwise, cannot dial out.

The setting in Asterisk.conf remains
[options]
internal_timing = yes



歡迎光臨 電訊茶室 (http://telecom-cafe.com/forum/) Powered by Discuz! 7.2