標題: [Solved]-OBi110 updated to 1.3 can't use HKBN 2b. [打印本頁] 作者: eXiteRIC 時間: 2012-1-8 11:28 標題: [Solved]-OBi110 updated to 1.3 can't use HKBN 2b.
本帖最後由 eXiteRIC 於 2012-1-8 21:57 編輯
I had set the configuration to previous post
Service Providers -> ITSP Profile A
1) General -> Name: HKBN 2b
where the Name entry contains whatever name that you want
2) SIP -> ProxyServer: s2hkbntel.net
3) SIP -> OutboundProxy: s21.hkbntel.net
4) SIP -> X_ProxyRequire: com.nortelnetworks.firewall
The "System Status" shown as
SP1 Service Status
Parameter Name Value
Status Registered (server=203.80.89.139:5060; expire in 39s)
PrimaryProxyServer
SecondaryProxyServer
CallState 0 Active Calls
But i can't phone in or out anymore.
Does anyone can give some advise ?!
Thanks.
[SOLVED] - Local Firewall Block the Service, turn off the router's "SPI Firewall" everything work fine.
Thanks for all member help to solve my problem. Kindly - eX作者: 雯雯 時間: 2012-1-8 11:46
I just take my OBi110 to China's FuJian, i just reset it last night and setup everything again, after all... when i dail **1 + HKNumber#, it return message "rejected by Service Provider, reason:413" any idea ?!作者: 角色 時間: 2012-1-8 13:06
How about the OBiTalk via OBiNet? Does it work for you between the Fujian and Hong Kong?作者: eXiteRIC 時間: 2012-1-8 13:49
Where are you right now? In Hong Kong or in Fujian?
YH作者: 角色 時間: 2012-1-8 13:59
I believe that you have two OBi110s right? If you are able to talk each other via OBi numbers, it means your Internet connection at each side should be okay.
1) Fujian right now.
2) I used 2b original software can dial in/out from computer, i think it must something wrong with Obi110 setting.作者: 角色 時間: 2012-1-8 14:31
Are you able to perform your echo test via your Fujian Obi110?
Are you able to perform your echo test via your Fujian Obi110?
Yes. I can heard my echo.
你时候OBi是什么version？是1.3吗？深圳跟香港一样1.3吗
No, i only have one Obi110, and plan for my parent to make free call to Hong Kong, i just flash the firmware last night by ***6.
HardwareVersion 2.8
SoftwareVersion 1.3.0 (Build: 2651)作者: 雯雯 時間: 2012-1-8 15:05
[Problem Solved] - The router SPI Firewall problem.
Thank you: YH & Man Man.作者: 角色 時間: 2012-1-8 22:22
How do you solve it?
YH作者: 角色 時間: 2012-1-8 23:55
I just finished the phone call with the member eXiteRIC using OBiTalk first and followed by HKBN 2b services. The first few calls employed the OBiTalk service. I was able to hear his voice without any problem but he said my voice was incomplete and was not able hear my message clearly.
Since we are not able to change the codec for OBiTalk, i.e. G711u, which consumes a lot of bandwidth. If your broadband speed is very high then you do not have any problem. However, in most cases, with limited bandwidth, you may have voice quality problem. Therefore I asked him to set the G729a codec to the first priority for the HKBN 2b service. Then we continued our last phone with HKBN 2b with the codec G729a. He said that he could hear my voice and message without any problem.
Kindly - eX