電訊茶室 - Powered by Discuz! Board

標題: [已经解决]大陆注册HKBN 2b——用Linksys PAP2T and OBi110不成功！ [打印本頁]

作者: 角色 時間: 2011-5-21 16:23 標題: [已经解决]大陆注册HKBN 2b——用Linksys PAP2T and OBi110不成功！

本帖最後由角色於 2011-5-21 18:12 編輯

因为想测试一下OBi110能否注册HKBN 2b，所以特别把在深圳的OBi110重新factory reset，但是都不能安装成功，于是我把我之前用开的Linksys PAP2T接上Internet（以前是可以，而我也没有改动过，之前一个也用过都没有问题），但是依然不成功。

不过前几天看到有CHing和CMei都用HKBN 2b app for iPhone进行注册，难度它们俩用不同的接入方式？

看看过几天，旧的PAP2T是否再次能注册，如果能的话，再用OBi110再注册HKBN 2b。

角色

作者: ckleea 時間: 2011-5-21 16:33

no problem to register 2b right now via iphone. Any other network problem in your side?

作者: 雯雯 時間: 2011-5-21 17:24

我今天在iPhone上用2B沒有問題, 早幾天將2B的setting放落Draytek Vigor 2920Vn上用也沒有任何問題!

作者: 角色 時間: 2011-5-21 17:31

回復 2# ckleea

I would not where gives the problem. Perhaps I have to wait for a few days and put the old Linksys PAP2T in place again to check whether it would work again.

YH

作者: ckleea 時間: 2011-5-21 17:33

try to reset your account here
http://pa.2b.com.hk/login.jsp

作者: 角色 時間: 2011-5-21 17:42

Oh! My God! I forgot this step.

Once follow ckleea's advice, the registration of my OLD Linksys ATA is able to register the HKBN 2b service.

YH

作者: ckleea 時間: 2011-5-21 17:57

My pleasure. I have encountered this many times before when you helped me to set up asterisk to use 2b

作者: 角色 時間: 2011-5-21 18:06

Perhaps, I am really getting OLD because I forgot what I had told you before when you installed your HKBN 2b.

Now I am able to install HKBN 2b in my Shenzhen OBi110.

YH

作者: ckleea 時間: 2011-5-21 18:14

Just you have not turned on your mobile so that I can tell you what wrong.

歡迎光臨電訊茶室 (http://telecom-cafe.com/forum/)