My OBi110 has registration error with ATCOM IP-01 (Register Failed: No Response From Server) after 60s re-boot. Please advise what configuration is needed.作者: 角色 時間: 2011-5-16 09:22
Information provided was not enough for finding where the problems are. Please provide more information such as what you have done.
I setup sp1 for Google voice and sp2 to my IP-01. Everytime I reboot OBi, registration for sp1 and sp2 are successful. After 60 seconds, OBi re-registration but this time failure. I have no registration problem for the same IP-01 account in x-lite or other SIP client.作者: 角色 時間: 2011-5-17 00:10
In this forum, one member is able to make three OBi110s register his IP-01 without any problems report.
YH作者: yiucsw 時間: 2011-5-17 02:21
From my past experience, the 1st thing i will check is the router's port 5060-5062 is forward to IP01 and OBI110 or not.作者: ckleea 時間: 2011-5-17 07:15
If other soft client can connect, there should be setting problem in Obi. My Obi can register without any problem.作者: 亞星 時間: 2011-5-17 09:00
5060 and 10000-20000 UDP port forward to local ip address of the ip-01
不知道楼主看完我们的信息后，是否把问题解决呢？
角色作者: cccttam 時間: 2011-5-17 17:58
Router port forward to IP-01 was done before. My router with DD-WRT firmware. The problem is only happen during re-registration. I will try to change another router for testing.作者: ckleea 時間: 2011-5-17 20:39
No idea for the time being but you can try to see a different router work. Very often, dd-wrt is not mature enough. Most of them focus on VPN part.作者: ckleea 時間: 2011-5-22 14:14
I got intermittent register failure problem to my asterisk server after upgrading to the latest firmware.
Anyone encounter this problem.
