電訊茶室 - Powered by Discuz! Board

標題: Macau Switchfin + Goip [打印本頁]

作者: yiucsw 時間: 2011-2-11 15:21 標題: Macau Switchfin + Goip

just bring the ip01 to macau and use default analog trunk, what is the best selection of Macau analog trunk line?
Set up GOIP as trunk to IP01 for China Mobile, and success login to IP01
Now is the hard part to me, I want to call forward from GOIP to IP01 analog trunk and anlog trunk to GOIP.
from IP01, incoming call can only call forward to an extension, but not trunk!
Any idea how to make this work? or i must set GOIP as SIP server?

作者: Qnewbie 時間: 2011-2-11 17:36

I think GOIP should be used as an extension for IP01. Then you can set up a dialplan for this extension. The setup just follows SPA3000/SPA3102.

作者: ckleea 時間: 2011-2-11 17:36

Your GOIP setup is like an ATA or IP01. For the latter, you can set up dial plan for intercommunication and sharing of trunk.

For your former, I think you can do so but depend on the setup. I have no experience with GOIP.

BTW, can you use GOIP to send out Chinese SMS?

作者: 雯雯 時間: 2011-2-11 17:45

其實可以考慮用Atcom的GSM IP PBX - IP4G.

作者: ckleea 時間: 2011-2-11 17:50

回復 4# 雯雯

幾貴，佢地 sample price US$380 with no module

作者: 角色 時間: 2011-2-11 21:42

I believe it can be done without any problem. GOIP is treated as an ATA.

YH

作者: yiucsw 時間: 2011-2-11 23:15

do you have the Macau Analog truck setting for IP01? seems that there is a lot item need to config.

作者: yiucsw 時間: 2011-2-11 23:20

for ATCOM GSM IP PBX - IP4G? do you know what is the bottom price for it?
and does it contain FXO and FXS also?

作者: 角色 時間: 2011-2-12 00:26

do you have the Macau Analog truck setting for IP01? seems that there is a lot item need to config.
yiucsw 發表於 2011-2-11 23:15

I have a Macau PSTN trunk in my Asterisk such that all the members can make Macau PSTN calls for free.

YH

作者: 角色 時間: 2011-2-12 00:27

do you have the Macau Analog truck setting for IP01? seems that there is a lot item need to config.
yiucsw 發表於 2011-2-11 23:15

It is the same an ordineary FXO trunk. I believe you have a problem in setting up the FXO of your ip01.

YH

作者: yiucsw 時間: 2011-2-12 01:11

can i use your Macau Analog truck for testing. Up to this moment, i cannot debug what is the issue?
I try to set to FXO. but seems not has some issue, i use the portugal instead of UK/US

作者: ckleea 時間: 2011-2-12 06:55

I can't remember how much I was quoted? But for the barebone, you can add different types of modules.

作者: 角色 時間: 2011-2-12 09:40

can i use your Macau Analog truck for testing. Up to this moment, i cannot debug what is the issue? ...
yiucsw 發表於 2011-2-12 01:11

账户已经created，请你看PM。

如果有什么问题请与我联系。

角色

作者: yiucsw 時間: 2011-2-12 22:35

对不起，没法登陆。

作者: yiucsw 時間: 2011-2-12 23:12

can login, and seems there is no problem with my goip. the only issue with my ip01.

my ip01 has the following error when connect to goip. Can you send me the macau configuration?
RTP Read too short.

the macau mobile is ringing but when pick up, the goip side cannot detect the phone is hook off.

作者: 角色 時間: 2011-2-13 09:09

Since I do not have any experience in using the GOIP interface, I am not able to provide any assistance to you. You perhaps ask the seller in Taobao to see if they can provide any means to fix your problem.

YH

作者: yiucsw 時間: 2011-2-13 20:07

i have no problem to use GOIP to connect to your Macau PSTN. so it is not GOIP issue, it is the IP01 issue. can you tell me the setting for SPA/IP01 in Macau.

作者: 角色 時間: 2011-2-13 20:51

What is the log in your ip01 using putty when your GOIP is called?

YH

歡迎光臨電訊茶室 (http://telecom-cafe.com/forum/)