電訊茶室 - Powered by Discuz! Board

標題: HKBN 2B Trixbox/Elastix Settings [打印本頁]

作者: marshall 時間: 2011-2-4 14:06 標題: HKBN 2B Trixbox/Elastix Settings

大家好! 我試緊用 Trixbox/Elastix 幫屋企起個PBX。有冇大大可以敎吓小弟，點樣可以set HKBN 2B 比 Elastix 同 trixbox 用?

唔該先

作者: 角色 時間: 2011-2-8 17:09

你HKBN 2b trunk？

角色

作者: 角色 時間: 2011-2-8 17:10

你有HKBN 2b trunk？

角色

作者: marshall 時間: 2011-2-12 17:23

HKBN 2B 個soft voip account。
而家setup 左比個SPA3102 用緊，不過想轉比elastix 用

作者: 角色 時間: 2011-2-12 20:23

No problem since we have two members who have employed HKBN 2b in their Asterisk servers including ckleea and me。

作者: ckleea 時間: 2011-2-12 22:26

回復 5# 角色

Setup is not difficult. Only is I don't know the setting for elastix. I use the following.

register => 34567890hk:password@s2hkbntel.net/34567890

;working dial in
;[hkbn2b]
;type = peer
;nat = yes
;username = 34567890hk
;secret = paaword
;port = 5060
;host = s2hkbntel.net
;fromuser = 35944101hk
;fromdomain = s2hkbntel.net
;canreinvite = no
;insecure = port
;disallow = all
;allow = alaw
;allow = ulaw
;dtmfmode = rfc2833
;context = from-hkbn2b
;outboundproxy = 203.80.89.139
;quality = yes

[hkbn2b]
type = peer
nat = yes
username = 34567890hk
secret = password
port = 5060
host = s2hkbntel.net
fromuser = 35944101hk
fromdomain = s2hkbntel.net
canreinvite = no
insecure = invite
disallow = all
allow = alaw
allow = ulaw
dtmfmode = auto
context = from-hkbn2b
outboundproxy = 203.80.89.139
quality = no

作者: ckleea 時間: 2011-2-12 22:31

Please also see this thread

http://www.telecom-cafe.com/foru ... 19&highlight=2b

作者: ckleea 時間: 2011-2-13 13:13

回復 5# 角色

角色兄：

In your asterisk, did you encounter problem for time out in 2b login or no one is answering error message?

作者: 角色 時間: 2011-2-13 13:49

I have no idea about it however the 2b always works perfectly.

YH

作者: ckleea 時間: 2011-2-13 14:03

I encounter the problem yesterday again when I was using 2b for a while. Both in and way for many times.

歡迎光臨電訊茶室 (http://telecom-cafe.com/forum/)