電訊茶室 - Powered by Discuz! Board

標題: 我的Asterisk 1.8开始启动了 [打印本頁]

作者: 角色 時間: 2011-1-17 00:35 標題: 我的Asterisk 1.8开始启动了

前几天把我另外一台IBM T43 Notebook弄好后，开始用yum 安装Asterisk 1.8，程序非常简单，现在我的Asterisk 1.8系统开始启动了。

角色

作者: Qnewbie 時間: 2011-1-17 04:01

Congs!

Poor old working horse T43

作者: 角色 時間: 2011-1-19 22:31

我的Asterisk 1.8，用yum安装，然后我用asterisk -rvvvv, 之后没有显示asterisk version，不知道大家的Asterisk version呢？

角色

作者: bubblestar 時間: 2011-1-19 22:56

CLI> core show version

作者: bubblestar 時間: 2011-1-19 22:58

yum upgrade 定係 yum update ?

新 install 定係由 Asterisk 1.4 或 Asterisk 1.6 用 Yum?

作者: 角色 時間: 2011-1-19 23:05

CLI> core show version
bubblestar 發表於 2011-1-19 22:56

Mine is Asterisk 1.8.1.1.

YH.

作者: 角色 時間: 2011-1-19 23:06

yum upgrade 定係 yum update ?

新 install 定係由 Asterisk 1.4 或 Asterisk 1.6 用 Yum?
bubblestar 發表於 2011-1-19 22:58

我是用yum install asterisk18。

角色

作者: 角色 時間: 2011-1-19 23:12

刚才我再用yum upgrade，然后用core show version, 现在是Asterisk 1.8.2.1.

这个和之前version有一个问题，就是Unable to open Asterisk database /var/lib/asterisk/astdb: Permission denied.

角色

作者: 角色 時間: 2011-1-19 23:17

我估计是astdb的owner是root，而asterisk没有root的read/write permission,所以。。。

为什么在/var/lib/asterisk下，有的file owner是root，有些是asterisk，为什么不是全用是asterisk呢？

角色

作者: ckleea 時間: 2011-1-19 23:21

This is the problem of yum install. If you compile, you would not encounter this problem. Also you may not be able to use google voice and calendar function. Check if you have gtalk.so jungle.so and res_jabber.so

作者: 角色 時間: 2011-1-19 23:23

After I had changed the ownership, the error was gone.

Where are those modoules located?

YH

作者: ckleea 時間: 2011-1-19 23:25

Mine is Asterisk SVN-branch-1.8-r301946

作者: 角色 時間: 2011-1-19 23:54

回復 10# ckleea

I have none of those modules in the directory /usr/lib/asterisk/modoules.

In order to have the google talk, I believe that I have to compile the tar directly.

YH

作者: ckleea 時間: 2011-1-20 05:14

回復 13# 角色

you need to do so. Follow the scripts provided by bubblestar who posted up recently. It works.

作者: ckleea 時間: 2011-1-20 11:25

I have just made a new build for asterisk 1.8 and GUI

Asterisk/SVN-branch-1.8-r302837
Asterisk GUI-version : SVN-branch-2.0-r5145

作者: bubblestar 時間: 2011-1-20 11:39

Strangely, when I made the build for GUI, it was clearly stated SVN-branch-2.0-r5144 dew days ago. However, when entering the GUI, it shows:

Asterisk Build:
Asterisk/1.8.2
Asterisk GUI-version : SVN-branch-2.0-r5143

作者: ckleea 時間: 2011-1-20 11:43

You download from the release source and so you got 1.8.2. Mine is from subversion that would get update almost daily.

Did you make an make install after make?

作者: bubblestar 時間: 2011-1-20 11:48

Yes, I did.

cd /usr/src
svn co http://svn.digium.com/svn/asterisk-gui/branches/2.0 asterisk-gui
cd asterisk-gui
sh configure && make && make install

作者: ckleea 時間: 2011-1-20 12:01

回復 18# bubblestar

Try again. Mine is now 5145. You can it includes setting for Gtalk

作者: 角色 時間: 2011-1-20 12:03

Is there any problems encountered when you used the GUI for Asterisk 1.8?

YH

作者: ckleea 時間: 2011-1-20 12:31

回復 20# 角色
So far so good. As stated before, most of the time to use GUI is to check the online and offline status and CDR. The CDR prompts me to identify hacker from Palestainin.
I seldom use GUI to do other thing except as monitor.

作者: bubblestar 時間: 2011-1-20 12:48

However, I have signal problem to indicate whther the extension is occupied or not. No matter the extension lines are on or off. It shows green light. No yellow or red light is shown on GUI. In this regard, it is meaningless and useless if I lose monitoring purpose, for the time being.

作者: bubblestar 時間: 2011-1-20 12:51

回復 19# ckleea

Shall I need to remove the old GUI first before another try or just cover the new version on the existing one.

作者: ckleea 時間: 2011-1-20 13:19

回復 23# bubblestar

Just make install is ok. It will overwrite your files.

作者: bubblestar 時間: 2011-1-20 13:31

Thanks and will try later.

作者: ckleea 時間: 2011-1-20 22:25

回復 22# bubblestar

I also notice the delay in changing the on / off status in the GUI.

作者: bubblestar 時間: 2011-1-21 09:57

Is your on / off status just delay showing in the GUI or not function? Mine is always in green no matter the line is used or not. I think it is the signal detection problem.

作者: ckleea 時間: 2011-1-21 10:12

It changes to red upon dialing or on hook. Also it will be appear when login.

歡迎光臨電訊茶室 (http://telecom-cafe.com/forum/)