標題: Google Voice 接入 Asterisk 1.8，遇到20秒後無聲音問題 [打印本頁]

---

作者: bubblestar    時間: 2010-12-24 16:48     標題: Google Voice 接入 Asterisk 1.8，遇到20秒後無聲音問題

用傳統網上撥打Google Voice 接入 Asterisk 1.8，遇到20秒後無聲音問題 。

之前使用Asterisk 1.4 的時候，在Google Voice 網頁上撥打直入Asterisk Server 能順利接通講話，但轉用Asterisk 1.8 後，想暫時繼續使用此方法，但結果接通後只能用約20秒，之後便沒有聲音。

所有設定全部都是由Asterisk 1.4 copy 至 Asterisk 1.8，所以應該沒特別改動和錯誤的。

試過disable Fail2ban 也沒有用，disable iptables 也沒有用。

其他由Asterisk 撥打 PSTN 及 撥打獨立注冊的 iptel 並沒有出現同樣情況，所以應該只是Google Voice 的問題。

有沒有師兄遇上同樣情形呢?

---

作者: Qnewbie    時間: 2010-12-24 17:23

I do not use AST&GV combo. However, there are other things might be considered: firewall and codec. Both could cause communication breaks after 20~30seconds.
In your case, have you checked codec?

---

作者: ckleea    時間: 2010-12-24 20:13

Did you tried 1.8.1.1? it is said to be bug fixed for google voice.

---

作者: bubblestar    時間: 2010-12-24 20:35

I installed the latest 1.8.1.1 directly.  Instead of using its built-in features of handling Google Voice, I just try to use the traditional method of dialing from Google's Webpage for testing but resulting in termination of call after about 10 - 20 seconds.  Such situation never exists in Asterisk 1.4

---

作者: ckleea    時間: 2010-12-24 20:39

Try the new method.

---

作者: 角色    時間: 2010-12-24 20:40

What do you mean by "the new method"?

YH

---

作者: ckleea    時間: 2010-12-24 20:49

Using the gtalk and jabber modules upon compilation. There is new configuration files for gtalk.conf and jabber.conf. Once set, it works.

---

歡迎光臨 電訊茶室 (http://telecom-cafe.com/forum/)

Powered by Discuz! 7.2