Board logo

標題: SIP Trunk for Iptel [打印本頁]
作者: 角色    時間: 2010-9-1 13:02     標題: SIP Trunk for Iptel

本帖最後由 角色 於 2010-9-1 15:44 編輯

sip.conf
  1. [general]
  2. disallow=all
  3. allow=ulaw,alaw,gsm,g729,iLBC,speex
  4. nat=yes
  5. canreinvite=no
  6. insecure=port,invite
  7. qualify=yes
  8. dtmfmode=rfc2833
  9. context=fron-desk

  11. register => john:john_password@iptel.org/from-iptel-john

  13. [iptel]
  14. type=friend
  15. username=john
  16. fromuser=john
  17. fromdomain=iptel.org
  18. host=iptel.org
  19. secret=john_password
  20. context=from-iptel

  22. [6001]
  23. type=friend
  24. secret=6001_password
  25. host=dynamic
  26. context=internal

  28. [6002]
  29. type=friend
  30. secret=6002_password
  31. host=dynamic
  32. context=internal
複製代碼
extensions.conf
  1. [iptel]
  2. exten => _102.,1,Dial(SIP/iptel/${EXTEN:3},,)

  4. [internal]

  6. include => iptel

  8. exten => 6001,1,Dial(SIP/6001,,r)
  9. exten => 6002,1,Dial(SIP/6002,,r)

  11. [from-iptel]
  12. exten => from-iptel-john,1,Dial(SIP/6002,,)
複製代碼
Using the prefix 102 for sending outbound calls for iptel. For instance 1000 to check voicemail.

YH
作者: ckleea    時間: 2010-9-8 09:18

Can you use sip url in asterisk to dial without the use of short code? Sometimes it works but most of the time it doesn't for iptel.
作者: 角色    時間: 2010-9-8 09:50

The short codes for making SIP URI calls should be okay in most cases with any problem via Iptel trunk. Sometimes Iptel will stop for a while and resume very quickly. If you want to increase the chances of mkaing SIP URI calls, why do not you use your own Asterisk server to make it?
作者: bubblestar    時間: 2010-9-8 10:49

SIP URL dialing is not so easy to configure.  Many people failed to do so.  Anyhow, there are many suggestion and solutions to make it work.  You may try the following.

http://mikepultz.com/2009/04/han ... ialing-in-asterisk/

I, myself have not tried before.  If you can make it, please let us know.

Thanks
作者: ckleea    時間: 2010-9-8 11:40

Thanks. It is very good indeed. This is the reason we need to use APL instead of relying on GUI



歡迎光臨 電訊茶室 (http://telecom-cafe.com/forum/) Powered by Discuz! 7.2