<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>電訊茶室 - OpenWRT</title>
    <link>http://telecom-cafe.com/forum/forumdisplay.php?fid=51</link>
    <description>Latest 20 threads of OpenWRT</description>
    <copyright>Copyright(C) 電訊茶室</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Tue, 28 Jul 2026 10:31:22 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://telecom-cafe.com/forum/images/logo.gif</url>
      <title>電訊茶室</title>
      <link>http://telecom-cafe.com/forum/</link>
    </image>
    <item>
      <title>一步一步教你解锁newifi3(新路由3)并编译刷入最新官方OpenWrt</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=7836</link>
      <description><![CDATA[一步一步教你解锁newifi3(新路由3)并编译刷入最新官方OpenWrt  <br />
<br />
<br />
另外 d2 平, 其中一個原因喺, 二手機同部分HW version嘅全新機, 有漏油問題, 會影嚮wifi, 所以如果有漏油問題要清理架<br />
<br />
新3严重的漏油！建议还是把硅胶垫替换了<br />
<br />
<br />
用酒精/火酒小心清理, 唔建議用wd40 ...]]></description>
      <category>OpenWRT</category>
      <author>tomleehk</author>
      <pubDate>Fri, 05 Mar 2021 08:36:02 +0000</pubDate>
    </item>
    <item>
      <title>刚刚在淘宝入手了Newifi D2....</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=7835</link>
      <description><![CDATA[刚刚在淘宝入手了一部Newifi D2 router， 只是RMB一百多元，顺便叫厂家帮我刷了openwrt系统， 试下玩下。<br />
<br />
这部Openwrt 有GUI界面（Luci），对我新手来说比较容易一点入手。它机身的Logo不是 Newifi ， 却是Lecoo， 牌子是听都没有听说过。。。包装盒子说它是双核880MHz ...]]></description>
      <category>OpenWRT</category>
      <author>vpn-learner</author>
      <pubDate>Mon, 22 Feb 2021 18:13:11 +0000</pubDate>
    </item>
    <item>
      <title>登入 到 koolshare openwrt ESXI</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=7788</link>
      <description><![CDATA[ROS + 軟路由 koolshare. <br />
<br />
安装了Koolshare X86 esxi 的 image. 加了兩個 Network adapter.<br />
boot 起Koolshare openwrt, 没有找到internal network 是那個network adapter 是 Eth0/Eth1? （public/private ip 是那個）<br />
最終是兩個network adapter 連到 internal network ...]]></description>
      <category>OpenWRT</category>
      <author>yiucsw</author>
      <pubDate>Tue, 17 Dec 2019 09:08:05 +0000</pubDate>
    </item>
    <item>
      <title>我是用NewWifi3 D2的OpenWRT, 自己唔識行ip rule 和ip route</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=7785</link>
      <description><![CDATA[我是用NewWifi3 D2的OpenWRT<br />
我在Startup 時用 SH 寫咗啲兩句!<br />
<br />
ip rule add fwmark 1 table 100<br />
ip route add local 0.0.0.0/0 dev lo table 100<br />
<br />
發現我登入時行是沒有問題的, 但我放在Startup 就行唔到! 其他的都無問題!!<br />
請問各大大可否出手幫忙!! 謝謝!! ...]]></description>
      <category>OpenWRT</category>
      <author>harold</author>
      <pubDate>Mon, 09 Dec 2019 01:36:53 +0000</pubDate>
    </item>
    <item>
      <title>FLASH ddwrt to openwrt ?</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=7001</link>
      <description><![CDATA[请教，如果我想把原本flash了 ddwrt 的 NETGEAR router 改去flash openwrt， 是否可以在 ddwrt 的 upgrade 界面去 直接 upgrade 呢？ 还是还有其他准备工作要做呢？<br />
谢谢！]]></description>
      <category>OpenWRT</category>
      <author>vpn-learner</author>
      <pubDate>Wed, 25 Jan 2017 09:50:30 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— All in One VPN services in x86 image</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6952</link>
      <description><![CDATA[剛剛在 debian x86 上製造了一個 OpenWRT 15.05 x86 Image 供 VM 和 routerOS x86 KVM 使用<br />
<br />
內容包括<br />
1. PPTP server<br />
2. OpenVPN server<br />
3. Shadowsocks Libev<br />
4. OpenConnect VPN]]></description>
      <category>OpenWRT</category>
      <author>ckleea</author>
      <pubDate>Sat, 17 Sep 2016 02:36:22 +0000</pubDate>
    </item>
    <item>
      <title>Script to send WAN IP address to Email box</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6894</link>
      <description><![CDATA[If you hope to send your router's WAN IP address to an email box every time the router is restarted, below is what you need to do:<br />
<br />
[Approach 1-MailSend package]<br />
1) Use OpenSSH to access default server IP 192.168.1.1 and input the fol]]></description>
      <category>OpenWRT</category>
      <author>tomleehk</author>
      <pubDate>Sat, 07 May 2016 13:54:44 +0000</pubDate>
    </item>
    <item>
      <title>Openwrt on Raspberry Pi 2</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6608</link>
      <description><![CDATA[原來是可以用在 Raspberry Pi 2]]></description>
      <category>OpenWRT</category>
      <author>ckleea</author>
      <pubDate>Tue, 14 Apr 2015 10:38:11 +0000</pubDate>
    </item>
    <item>
      <title>想幫 Barrier Breaker  compile 個 Softether，有冇 CHing 知點做？</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6426</link>
      <description><![CDATA[試過跟下面個網頁做，不過佢基本係為 Attitude Adjustment 而寫，雖然已經改過D地址，指向 Barrier Breaker，但 compile 出黎既野最後都響BB度行吾郁。<br />
<br />
<br />
有冇 Ching 知到應該點修改，compile 出黎既野先可以響BB度行到？吾該。<br />
另外，有冇人知 softether 有冇 GUI，或 ...]]></description>
      <category>OpenWRT</category>
      <author>milanolarry</author>
      <pubDate>Sat, 18 Oct 2014 07:48:59 +0000</pubDate>
    </item>
    <item>
      <title>如果想 compile 個 package畀 openwrt要用 D 乜野program？</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6294</link>
      <description><![CDATA[如題....................]]></description>
      <category>OpenWRT</category>
      <author>milanolarry</author>
      <pubDate>Sun, 06 Jul 2014 12:29:16 +0000</pubDate>
    </item>
    <item>
      <title>jffs2 與 squashfs 有什麼分別？</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6293</link>
      <description><![CDATA[見到每型號的 router 都有兩種 firmware，不知有什麼分別。]]></description>
      <category>OpenWRT</category>
      <author>milanolarry</author>
      <pubDate>Fri, 04 Jul 2014 14:22:24 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— deleted</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6033</link>
      <description><![CDATA[Message was deleted due to incorrect message.]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Sat, 30 Nov 2013 02:27:28 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— 怎样做factory reset？</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6032</link>
      <description><![CDATA[有的时候想把OpenWRT router 做一次factory reset，那么是怎样做呢？<br />
<br />
其实非常简单，就是用brower打开OpenWRT的GUI界面，然后按照下面的图片去做就可以。Factory Reset后的login 密码是 admin。]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Sat, 30 Nov 2013 02:10:36 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— OpenVPN Server for Tun device</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6008</link>
      <description><![CDATA[Source : <br />
<br />
1. Installation of OpenVPN package2. Network configuration<br />
<br />
Add a VPN interface to the end of /etc/config/network3. Firewall configuration<br />
<br />
Add rules to the end of /etc/config/network4. Restarting netwo]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Sun, 24 Nov 2013 06:06:40 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— TL-WR1043ND USB port for expansion of root file system</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6006</link>
      <description><![CDATA[因为系统的ROM Flash只有8M，如果要安装很多packages，那么8M Flash就不够了。我们可以通过USB 2.0的port，然后安装flash drive后，通过适当的settings，那么就可以安装很多packages了。<br />
<br />
<br />
<br />
Root file system只有4.78M剩余。 ...]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Sat, 23 Nov 2013 11:59:12 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— TL-WR1043ND USB port for additional file storage</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=6005</link>
      <description><![CDATA[在TL-LINK TL-WR1043ND里有一个USB Port，在OpenWRT里主要有两个用途。第一个是一般的File Storage （FAT32，EXT4），而第二个就是用来用作真个root file system用，以代替原来的8M flash ROM。在12.09 Final里（其他version没有试过），可以很简单就可以搞定。<br />
<br />
下面我 ...]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Sat, 23 Nov 2013 10:16:10 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— OpenVPN on 10.03.1 Vs 12.09</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=5996</link>
      <description><![CDATA[现在的OpenVPN version是12.09，而之前一个版本就是10.03.1，而OpenVPN有一个非常重要的luci-app-openvpn。在10.03.1能正常使用，但是在12.09就不能工作，所以我把之前flashed 12.09的router，又再转回去10.03.1。<br />
<br />
 ...]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Mon, 18 Nov 2013 14:49:34 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— For other topic</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=5995</link>
      <description><![CDATA[References:]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Sun, 17 Nov 2013 17:32:48 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— FreeSwitch</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=5994</link>
      <description><![CDATA[References：]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Sun, 17 Nov 2013 17:01:35 +0000</pubDate>
    </item>
    <item>
      <title>【OpenWRT】—— OpenVPN Server and Client （准备篇）</title>
      <link>http://telecom-cafe.com/forum/viewthread.php?tid=5993</link>
      <description><![CDATA[还没有建立OpenVPN，先来做点资料搜集。<br />
<br />
References：<br />
<br />
<br />
<br />
<br />
<br />
<br />
Very good example to illustrate the client device traffic was redirected to the Server's gateway to Internet.<br />
<br />
<br />
<br />
Reference]]></description>
      <category>OpenWRT</category>
      <author>角色</author>
      <pubDate>Sun, 17 Nov 2013 16:37:11 +0000</pubDate>
    </item>
  </channel>
</rss>