bubblestar

今天再自己測試了幾次，証實一下。 Google Voice 網頁內撥打 gizmo5 再接出接入Asterisk 1.4 是沒有問題的，用IP01試過了。  
而利用Asterisk 1.8系統，在Google Voice 網頁直撥 Gizmo5 已不能使用。 不知道是不是因為Asterisk 1.8有了直撥功能之後，再不支援網撥，抑或只是暫時停止。

ckleea

回復 16# bubblestar


No more incoming call from gizmo5 when using asterisk 1.8. Outgoing works till now.

bubblestar

回復 17# ckleea


   
You mean you can still call gizmo5 directly from Hard Phone thru Asterisk 1.8 directly?  I can't.  Just hear 2 ringing and then call drops.

ckleea

Yes, I still use Gizmo5 to call but I do not register their server all the time. Only when needed.

bubblestar

經ckleea 一提之下，再查找自己DP設定，原來我在Asterisk 1.8 仍也可以用Gizmo5 撥出電話的。原因也是由於自己少用，平時disable 了registration。

有需要時才開啟某些功能使用，也是防 Hack 、防盜用 或 防濫用的一種防衛方式。

ckleea

回復 20# bubblestar


建議如下，
register string at sip.conf to remark out not to use，即加";"
the remaining gizmo5 dial out plan reserved at sip.conf so that when needed, can dial out

bubblestar

Thanks for your recommendation.  Such arrangement can avoid editing much work from both sip.conf and extensions.conf.   Only change a single sip.conf file can simplify our administration.

Qnewbie

WOW, never think that the gateway function is available for asterisk too. SPA3000 has this function but I did not test it.

Could ckleea or bubblestar explain a little more on this kind of on-the-fly registration?

ckleea

回復 23# Qnewbie
It is just put in the usual

register => 1747XXXXXXXX,password@proxy01.sipphone.net:5060; comment this line out as we do not use incoming call function in asterisk 1.8

[gizmo5]
.
.
.
.

into the sip.conf

& [CallingRule_gizmo5]
exten=> 01!,1 DIAL(SIP/{EXTEN,1}@gizmo5)


So we do not use incoming call function but only outgoing call when dial with 01xxxxxxxxx

Qnewbie

OK, IC. Thanks ckleea C-Hing!