雯雯

回復 90# 角色

試了都係唔得!

ckleea

回復 89# 雯雯


    Try to add both in your context

requirecalltoken = no
calltokenoptional = 0.0.0.0/0.0.0.0

角色

回復 92# ckleea

Please put the above settings in the following configuration file.

To fix the problem, add the following entries to /etc/asterisk/iax_general_custom.conf:

ckleea

回復 93# 角色


    In my asterisk, I have only one iax.conf

雯雯

回復 92# ckleea

Qnap試了都仲係唔得.

ckleea

回復 95# 雯雯

Then not sure for your problem but you may try to copy mine

1. [general]
   
2. bindport = 4569
   
3. bindadd = 0.0.0.0
   
4. adsi = no
   
5. authdebug = no
   
6. bandwidth = medium
   
7. codecpriority = reqonly
   
8. delayreject = no
   
9. forcejitterbuffer = no
   
10. iaxcompat = no
    
11. iaxmaxthreadcount = 100
    
12. iaxthreadcount = 10
    
13. jitterbuffer = yes
    
14. maxjitterbuffer = 1000
    
15. maxjitterinterps = 10
    
16. maxregexpire = 60
    
17. minexcessbuffer =
    
18. minregexpire = 60
    
19. mohinterpret = default
    
20. nochecksums = no
    
21. resyncthreshold = 1000
    
22. trunkfreq = 20
    
23. trunktimestamps = no
    
24. requirecalltoken = no
    
25. disallow = all
    
26. allow = ulaw
    
27. allow = alaw
    
28. allow = g729
    
29. quality = yes
    
30. maxcallnumbers = 128
    
31. maxcallnumbers_nonvalidated = 2048
    
32. tos = ef

複製代碼

ckleea

It is in the general section of iax.conf

ckleea

I use the following in individual phone setting

1. [uiphone1](!)
   
2. type = friend
   
3. host = dynamic
   
4. qualify = yes
   
5. disallow = all
   
6. allow = ulaw
   
7. allow = alaw
   
8. allow = g729
   
9. requirecalltoken = no
   
10. calltokenoptional = 0.0.0.0/0.0.0.0

複製代碼

Please note I use template. You may not be able to copy to your system

Remember to reload either iax reload at command line or service asterisk restart

雯雯

回復 96# ckleea

試了都係唔得.

ckleea

Please explain what is the dialplan you are using. I am not clear on the log you showed

雯雯

回復 100# ckleea

個log係IP04既, 當香港條PSTN有電話打入來時, IP04會以IAX方式將call同時forward去5001 (Synology)和5003 (Qnap), 現在問題是Qnap不會響.

角色

那么可能你要把那些settings放入QNAP那里，还有把QNAP那个log的message显示出来，然后大家看看。

雯雯

回復 102# 角色

就是把那些settings放了落Qnap, Qnap log明天補上.

ckleea

回復 101# 雯雯


    So it is

PSTN --> IP04 ---> IAX  ---> synology and QNAP

Please try to login in IP04 and dial to QNAP. Show us the log in this dialing event to see

You need to make sure you have correct in and out settings between IP04 and synology; IP04 and QNAP; synology and QNAP

雯雯

回復 104# ckleea

Qnap log:

下載 (595.55 KB)

2012-10-16 20:10