【角色茶桌】—— 我的Asterisk 1.8安装历程 —— make menuselect 选项是否有更改呢？
本帖最後由 角色 於 2011-9-18 01:23 編輯
1）下载CentOS 5.6 ISO，然后安装，选Server Mode
- Firewall要disabled, SELINUX=disabled
2）下载asterisk tar ball，我用的asterisk-1.8.6.0.tar.gz
- save asterisk-1.8.6.0.tar.gz in /usr/src/asterisk
- 用tar xvf askterisk-1.8.6.0.tar.gz
3) Install the following packages
yum install gcc \
gcc-c++ \
libxml2-devel \
libtermcap-devel \
ncurses-devel \
newt-devel \
4) ./configure
(needs gcc, gcc-c++, limxml2-devel, libtermcap-devel)
5) make menuselect
(needs ncurses-devel and newt-devel. We need to re-run ./configure again in order to make "make menuselect" work)
6） make
+--------- Asterisk Build Complete ---------+
+ Asterisk has successfully been built, and +
+ can be installed by running: +
+ +
+ make install +
+-------------------------------------------+
7） make install
+---- Asterisk Installation Complete -------+
+ +
+ YOU MUST READ THE SECURITY DOCUMENT +
+ +
+ Asterisk has successfully been installed. +
+ If you would like to install the sample +
+ configuration files (overwriting any +
+ existing config files), run: +
+ +
+ make samples +
+ +
+----------------- or ---------------------+
+ +
+ You can go ahead and install the asterisk +
+ program documentation now or later run: +
+ +
+ make progdocs +
+ +
+ **Note** This requires that you have +
+ doxygen installed on your local system +
+-------------------------------------------+
8) make samples
9) yum install doxygen and then followed by make progdocs
10) make install
11）make config
12) make install-logrotate
13) chkconfig asterisk on
14) service asterisk start
15) asterisk -rv
Asterisk 1.8.6.0, Copyright (C) 1999 - 2011 Digium, Inc. and others.
Created by Mark Spencer <markster@digium.com>
Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details.
This is free software, with components licensed under the GNU General Public
License version 2 and other licenses; you are welcome to redistribute it under
certain conditions. Type 'core show license' for details.
=========================================================================
Connected to Asterisk 1.8.6.0 currently running on shirley (pid = 14639)
Verbosity is at least 3
s
下面的网站可以提供参考:
https://wiki.asterisk.org/wiki/display/AST/Home
现在有D515和D525的电脑（其实感谢bubblestar兄让出他的D525MB），所以基本上设备都齐全，现在可以慢慢安装Asterisk 1.8了。
我特意另开这幅帖子，主要记录我安装Asterisk的历程，可以让大家参考。
角色 |
發表於 2011-9-13 16:29
| 
