返回列表 發帖
回復 660# ckleea
應該點設定先正確? 基本上都係 7 x 24 長開.

Time Interval.jpg (67.24 KB)

Time Interval.jpg

TOP

E.g. allday
click on by day of week (Mon to Sun)
click on entire day.

Then in the incoming rule, look up allday

TOP

I make a new firmware 542 today with success. It seems that it is using new kernel and new asterisk 1.4.41

TOP

E.g. allday
click on by day of week (Mon to Sun)
click on entire day.

Then in the incoming rule, lo ...
ckleea 發表於 2011-6-6 10:57

加咗, 打 PSTN number 6011 都係唔識響

TOP

我的經驗是Time Interval 並不是必需的,我懷疑係Dial Plan 裡沒有剔取加入PSTN 呢條Outgoing Dialing Rule

TOP

回復 665# bubblestar
我 outgoing 無問題只係 PSTN incoming 去指定內線唔會響, 唔知飛咗去邊

TOP

內線對打,Ext. 6011 會響嗎? 6011 打出會響嗎?

TOP

回復 667# bubblestar
內線對打 OK, 指定內線都可以打得出街線.

TOP

Can you look at the CLI to see what happens when PSTN is in?

TOP

回復 668# 亞星

    請看這例子
    http://www.telecom-cafe.com/foru ... 9&highlight=IVR

TOP

最終都係要 reboot 隻 IP01 先得.

TOP

回復 671# 亞星


    有D奇怪,不過最緊要 work

TOP

With the help of bubblestar CHing, I got my remote IP01 setup under a dual wan environment. I have been already used DHCP option with the router assigned a fixed IP to IP01 every time. However, after some investigations, it was found that there was a sip registration problem (please note IAX works very well).

Upon advice, I change the network setting to static IP, now every thing works.

TOP

Below is my latest IP01 setup

screenshot.1.jpg

screenshot.2.jpg

The dialplan still needs some more adjustment and configuration. The previous problem of unable to remote updating the config files has been fixed. But now, there are still some problems in the dual wan environment with the draytek router.

Occasionally clients get one way audio.

TOP

Stay tuned for switchfin.

The administrator said this in the forum

Definitely we will test Asterisk 1.8 but it will happen after we stabilize/test well the new kernel.

TOP

返回列表