bubblestar

但是，之前所做的設定，我有些擔心是否能夠百份百可以備份及恢復，特別是在Web Portal 上所作的自訂設定，相信要再一次重設。 leitany 兄是否有此經驗，可以完全備份復原嗎?

leitany

回復 16# bubblestar

还真没有试过对设置的Backup和Restore
我的一个主要的SIP账号放不进去，OBI还没有正式使用起来，设置也就经常改来改去的 --- 做Reset就无顾忌了

daibaan

I have been using ***6 to check for update and perform the actual firmware update, this procedures is simple and works for me for the past 2 updates.

Are you getting dial tone at all?

daibaan

回復 16# bubblestar

I religiously use the backup and restore feature when I play with settings, it works well, except that the backup file does not contain SP1/SP2 passwords, so once you restore, you have to enter the passwords again.

Now that Obi allow user to enter passwords in the Address part of the VGx and Speed dial, I would think those would be stored in the backup file.

ckleea

回復 18# daibaan


    In my case, my Obi110 just did not generate any dial tone. Except I could access the interface and changed some settings, all the telephone functions did not work until I made a full factory reset.

角色

How did you do your firmware update? You did it remotely or locally?

YH

ckleea

回復 21# 角色


At the beginning, after I read the update announcement, I logined into my account and found the update notification. I click on this "!", it brought me to the announcement page. I checked update could be done locally. It popped up the message that system was busy.
Many attempts failed Reboot many times.

Until finally, I tried on factory reset. I am able to update the firmware locally.

What I encountered within that few hours were
1. Obi110 was offline
2. no connection tone when the phone was plugged in.
3. the status screens I posted up early
4. I could till enter the box to make some changes, except could not reset the box, reset satstistics.

Very strange behaviours.

角色

Enhancements & Fixes in Maintenance Release 1.2.1(2283):

- Google Voice calls no longer dropped when the OBi is installed behind certain home routers.
- Added Google Voice Backing Off reason on the status page.

- DSCP marking has correct default values for SIP and RTP.
- Speed dial values with extra white spaces supported.
- DHCP enhancements.
- Added more information under SP1 and SP2 Service Status for SIP:
      - Show the IP address of the server that we last registered with, or currently registering with (so we know if there is a DNS error, etc.).
      - Show the expiration time in seconds for the current registration.
      - Show the time in seconds for the next retry if last registration has failed.        
- Call back from AA fixes.
- Hostname resolution now favors DNS SRV.
- Restart not required after configuring syslog settings.
- Restart not required when setting features via star-codes.
- Use of hex values in the nonce count parameter in the Authorization header of SIP requests.
- Available codecs now ordered in accordance with priority settings in codec profile.
- Support for India PSTN Caller-ID detection (OBi110).
- #1, #2, etc. can be used as dialing prefixes for call routing.
- Added options to support NAT traversal for SIP Gateway and URL calls on SP1/2.
  You may now append these URL parameters to speed dial and SIP Gateway VG1-8 access number, separated by ';',
   - ui=userid[:password]
   - ui=user-info, password is optional
   - op=[ i ][ m ][ n ][ s ]        ;option flags, i=ice,  -m=symmetic-rtp, n=natted-address, s=stun
    Examples:
     SpeedDial = sp2(1234@sip.inum.net;ui=1000:xyz;op=sm)
     VG1-8 AccessNumber = SP1(sip.inum.net;user=1000;op=imns)
     Note that if userid or password is specified in VG1-8 AccessNumber, it overwrites the settings in AuthUserID, and AuthPassword in the VG.
- Improved audio quality in lossy network environments.
- Show TX and RX codec name, and tx and rx packet size for each call leg on a bridged call on the call status page.
- Improved firmware upgrade robustness to eliminate chances of corruption.
- Added Outside Dial Tone to Tone Profile A and B.
- Caller can hear the LINE port dial tone instantaneously after pressing # key on the phone.
- Call waiting and 3-way calling behavior fixes.
- Call History page now displays correctly on IE7.

仁杰

刚想上来说，最近OBi固件更新的很不勤快，没想到就有新版本出来了：）

ckleea

- Improved firmware upgrade robustness to eliminate chances of corruption.

呢個bug就是我今次遇到！

bubblestar

中獎了

ckleea

回復 26# bubblestar

最重要都係救得返！